In one of our previous blogs we already discussed how to use ImageJ to visualize image statistics and make dark noise visible. However before analyzing the dark noise with a program like ImageJ, it is important to measure the dark noise correctly. Here are some tips on correctly measuring the dark noise.Read More
Cameras produce a significant amount of heat, especially the latest large resolution image sensors running at high frame rates such as the On Semi Vita25k, the Python 25k and the CMV50000. This heat is mainly originating from the image sensor (image read-out) and the FPGA (image processing) and it needs to be removed from the camera efficiently. Too much heat can damage the image sensor or FPGA. Furthermore the image noise will increase with increasing temperature.Read More
Adimec Exhibits New CMOS Extended Day Cameras with Adaptive Resolution to expand identification capabilities in low light
From April 11th to 13th, Adimec will exhibit at the SPIE Defence + Commercial Sensing conference in Anaheim (US).
The picture below gives you a preview of what you can expect:Read More
Topics: Global security
Often a robust and simple system design is more cost effective and also easier to maintain. Simple system design is achieved by using proven technologies and at the same time reducing the variety of technologies that are being used. Less cables and less hardware make a system even simpler, robust and cost efficient.
One of the strong advantages of CoaXPress (CXP) is that it is designed to simplify the system architecture.Read More
Adimec celebrates its 25th Anniversary this year. During the past 25 years we have gathered a large amount of knowledge about cameras.
The tooling for building cameras has changed over time. In our Throwback Thursday blog series we will give you a look into the history of camera manufacturing at Adimec.Read More
We have noticed there is some confusion about the various Sony Pregius image sensors and their resolution. The resolution doesn’t necessarily increase with a higher number in the sensor’s name. Therefore we will give in this blog a brief overview of the resolution of the Sony IMX250, IMX252, IMX253 and the IMX255 sensors. We also address the question which of these IMX sensor should I choose?Read More
Topics: Global security
Very often high full well capacity and high dynamic range is mentioned in one sentence. However actually they are not per definition the same. For example at Adimec we do sell cameras with high full well capacity however if you are looking for a high dynamic range this might not be the camera of your choice. So what is the difference and when do you choose one over the other.Read More
Practical tips for using software to analyze image quality
Next to writing blog’s I am also part of the support team within Adimec. To support customers the support team frequently has to analyze image quality. Image averages, standard deviations, or histograms are frequently used image properties that help us in our analysis but also cross sections of images come in handy.Read More
Another situation where latency or accurate triggering is important is if multiple cameras are being used. To be able to relate images with each other and to construct for example 3D images from a set of 2D images, such as with 3D All Optical Inspection (3D-AOI), it is necessary that the images are recorded at exactly the same time. This is especially true if the object of interest is moving along your inspection machine.Read More
Topics: Interface Technology
As today is the shortest day of the year (at least in the northern hemisphere) and the largest part of the day is dark, we though it a good moment to give you a few ideas on how to optimize image quality in low light conditions. Due to the simple fact that you need light to obtain an image with a visible camera, low light conditions are by definition challenging. However, even with low light you can take measures to obtain the best possible image result.Read More