Blog_banner_beyond_the_datasheet

Camera delivered for a high-resolution imaging based, non-invasive biopsy assessment system

Posted by Gretchen Alper on Mon, Dec 15, 2014

Adimec (Netherlands) together with five partners, as part of the CAReIOCA consortium are developing & validating a high-resolution high-speed imaging based medical device to perform non-invasive optical biopsy for cancer assessment. Adimec contributes with a specific high-performance CMOS CoaXPress camera. 

Read More

Topics: Applications

Designing full HD cameras into rugged electro-optical systems

Posted by Gretchen Alper on Fri, Nov 21, 2014

The following was published in a special reports edition on High Performance Camera Solutions for Military Applications of Defence Industry Reports:

Read More

Topics: Applications

How metrology cameras with high speed combined with high image quality improve accuracy

Posted by Gretchen Alper on Fri, Sep 12, 2014

We have talked about how high resolution, high-speed metrology cameras can improve accuracy and throughput for process control systems used in semiconductor and electronics inspection.  BUT, this is only true if the cameras provide the necessary image quality and deliver this image quality consistently  at the full frame rate. 

Read More

Topics: Applications

3D Metrology OEM Camera Requirements

Posted by Gretchen Alper on Wed, Jul 30, 2014

As the objects to inspect/measure in high-tech manufacturing become smaller, higher-resolution cameras with better spatial resolution can improve accuracy and precision.  This requires a high-quality machine vision camera design, or what is now called a metrology camera.  3D measurements in particular pose increasing demands on camera performance and reliability.  

Read More

Topics: Applications

High-resolution CoaXPress cameras with image processing for expanded networking capabilities

Posted by Gretchen Alper on Wed, Jul 23, 2014

The BASTION project was initiated on April 1, 2014 with the main of objective to research and develop new applications for the Broadcast Market, and for the Security and Surveillance Markets.  Both will be built on top of the Internet Protocol network, which will allow distributing the video over several physical sites. The cameras will be located on one or more sites, and the monitoring/control room will be on a separate site. The main benefit of this distribution is that it will enable:

Read More

Topics: New Adimec Products, Applications

Industrial metrology cameras for increased throughput and accuracy

Posted by Gretchen Alper on Tue, Jul 22, 2014

We recently published several articles about how OEM metrology cameras can help you make a performance leap with your process control system. Here are some details about how high resolution cameras are increasing throughput and accuracy for semiconductor and electronics metrology and inspection systems. 

Read More

Topics: Applications

Increase Accuracy of Optical 3D Measurements

Posted by Gretchen Alper on Wed, Jul 9, 2014

In semiconductor and electronics manufacturing, there has been a move towards 3D measurements to provide accurate process control of smaller dimensions for higher yield and quality of new packaging technologies.  For example in electronics manufacturing a 2D view from the top only allows for detection of defects such as shifts, rotations, and cracks, but not whether components are flat on the board or the volume of solder paste.

Read More

Topics: Vision System Optimization, Applications

Machine Vision Cameras in Medical Imaging

Posted by Gretchen Alper on Fri, Jun 27, 2014

There are many more medical applications relying on machine vision cameras.  Check out how OEM industrial cameras are used in FFOCT-based endoscopes and in cataract surgery systems:

Read More

Topics: Applications

Machine vision applications beyond the production floor: cataract surgery

Posted by Gretchen Alper on Thu, Jun 19, 2014

The LENSAR™ Laser System offers cataract surgeons precision and accuracy, while optimizing overall visual outcomes. The LENSAR™ Laser System is one of the only femtosecond lasers built specifically for refractive cataract surgery. Because it was designed from the ground up, every aspect of the laser has been purposefully designed to meet the needs of cataract surgeons.

Read More

Topics: Applications

Instrument design of FFOCT based endoscope using high-resolution imaging for non-invasive biopsy assessment

Posted by Gretchen Alper on Fri, Jun 6, 2014

Adimec together with five partners, as part of the CAReIOCA consortium are developing & validating a high-resolution high-speed imaging based medical device to perform non-invasive optical biopsy for cancer assessment. Adimec contributes with a specific high-performance CMOS CoaXPress camera

Read More

Topics: Applications